Adrian 155 Report post Posted February 21, 2011 This one isn't worth a patent lawyer or agent.LOL But here you go. It comes in handy in tight shiizzle ations. LOL The Breeze Breaker. Ha . LOL get it???? You can have it. I used it a couple of times already and it works great. Cost' about 3.00 to make. Local home cheapo for the clamps and some left over tarp from your last project. A couple pc. of 1 in. pvc tubage about 18-20 in.. Of course I will add it to ever expanding Breezeā¢ line of products. Why not, huh, why not??? Whatevaaaaaaaaaa ...... but you can have for free!!!!!!!!!! Share this post Link to post Share on other sites
0 Tonyg 14 Report post Posted February 22, 2011 Fences go quick for me and a shield in one hand for the top is easy and much faster. In places where stain must not go through or over I have used 2 2x4's and a 9x12 drop cloth. Nail the corner of the drop cloth to the top end of the 2x4 and drop them on the other side to lean against the fence. Spray 12ft then move one pole for another 12ft. Share this post Link to post Share on other sites
0 bigchaz 157 Report post Posted February 22, 2011 I make my lackeys hold the tarps up when I spray the fence....no lackeys this year so i guess its PVC time Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted February 22, 2011 Is a lackey the same thing as a swamper? ( helper) Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted February 22, 2011 Fences go quick for me and a shield in one hand for the top is easy and much faster. In places where stain must not go through or over I have used 2 2x4's and a 9x12 drop cloth. Nail the corner of the drop cloth to the top end of the 2x4 and drop them on the other side to lean against the fence. Spray 12ft then move one pole for another 12ft. Show us your sheild Bro!!!!!!! I'd love to see it. Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted February 22, 2011 This setup weighs like 2#'s and rolls up when finished and fits right in the tool box after rinsing. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted February 22, 2011 We use shields, tarps, and plastic. Works well. Beth Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted February 22, 2011 I have been contemplating many versions of what you have for use on decks not only to calm the breeze but to catch the overspray. Functionality vs practicality has always been the issue though. We tend to drape a tarp over a fence and spray while under it. The guys are wearing respirators while doing it but it does help control the overspray. Decks of course are another thing. We tend to spray only the undersides of the rail caps and bottom rail to get all the corners involved around the spindles. Otherwise its pad only for the rest. Rod!~ Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted February 22, 2011 Yeah Rod, The Breeze Beaker is just something I used a couple of times so far for fences. Idle hands are the devils workshop. I have just been trying to stay busy and keep my old mind active during the mending. I don't know of any better ways than what you and your wife described for decks. IMO, sometimes the best way to avoid overspray is the good old fashioned way. With a brush and pad. But hey, that's why they hire us for this type of work. They at least know that there is a PITA factor involved. Have a great one everybody? Share this post Link to post Share on other sites
0 Tonyg 14 Report post Posted February 22, 2011 Show us your sheild Bro!!!!!!!I'd love to see it. standard spray shield http://www.bigpaintstore.com/lda-420-710.html?synertech&utm_source=gbaselive.com&utm_medium=google&utm_campaign=synertech.net and drops: Share this post Link to post Share on other sites
0 Adrian 155 Report post Posted February 23, 2011 Nice! Share this post Link to post Share on other sites
0 Greg R 82 Report post Posted March 2, 2011 We usually tarp off a "spray booth".... works like a charm and no overspray gets through. I have went to the extent of buying an Ez-popup canopy even and building an 8x8 spray booth with heavy plastic but it was overkill and a pain to move. 2 or 3 mil plastic with canvas to weight it down still works the best. Share this post Link to post Share on other sites
0 James 625 Report post Posted March 2, 2011 I use 2 inch dowels 6 to 8 ft long and rap the plastic and clamp. I use two dowels one .at each end with about 8 feet of plastic between. Lots of big card board. Share this post Link to post Share on other sites
This one isn't worth a patent lawyer or agent.LOL
But here you go.
It comes in handy in tight shiizzle ations. LOL
The Breeze Breaker. Ha . LOL get it????
You can have it. I used it a couple of times already and it works great.
Cost' about 3.00 to make.
Local home cheapo for the clamps and some left over tarp from your last project.
A couple pc. of 1 in. pvc tubage about 18-20 in..
Of course I will add it to ever expanding Breezeā¢ line of products.
Why not, huh, why not??? Whatevaaaaaaaaaa
...... but you can have for free!!!!!!!!!!
Share this post
Link to post
Share on other sites