Aplus 525 Report post Posted April 12, 2003 Lots of nasty mold growing on these fabric awnings. It was thicker and tougher than I hoped it would be. I had to do some hand scrubbing to get the desired results. Bleach did most of the work, but there was still crud left behind that the brush handled. Share this post Link to post Share on other sites
Aplus 525 Report post Posted April 12, 2003 After..... Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted April 12, 2003 WOW! Looks great Tony! Share this post Link to post Share on other sites
Aplus 525 Report post Posted April 14, 2003 The tops of the awnings were pretty much faded from the sun, but the customer was happy that all the mold was gone. There were spots that had to be over an 1/8" thick! And the white piping showed up a lot nicer once cleaned. Does anyone have thoughts as to whether a cloth awning like this could be recolored, so it doesn't look so faded? If it had been vinyl, I would have applied armor all, or something similar, to make it shine, but I didn't think that would be a good idea on the cloth. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted April 14, 2003 Tony, As far as the recoloring, you may want to look into a carpet store, as they dye carpet and the process would probably be very similar. Share this post Link to post Share on other sites
Lenny Schrec 14 Report post Posted April 18, 2003 Take a look at www.doitrightinc.com for coloring awning. I used some of there cleaners and they worked fine. I have also used gutter zap. it works good also but be carefule not to use it to strong. Share this post Link to post Share on other sites
karlosdaze 14 Report post Posted October 19, 2003 Hi, just seen "Aplus" images above. I can't see any awnings at all? Did you upload the wrong pictures? Karl Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted October 20, 2003 Karl There was a server switch and some of the pictures got mixed up, Beth will fix it. Share this post Link to post Share on other sites