Tazz 14 Report post Posted December 14, 2004 I was wondering if I could plumb the fuel line from my pressure washer into the fuel tank of the van it is mounted in. Will the 18hp briggs be able to pull the fuel up from the tank? thanks Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted December 14, 2004 Here is a link to the adaptors for carpet cleaning truch mounts. http://www.jon-doninc.com/catalog/advanced_search_result.php?keywords=fuel&x=6&y=5 Share this post Link to post Share on other sites
name is Lou 15 Report post Posted May 3, 2011 Here is a link to the adaptors for carpet cleaning truch mounts. http://www.jon-doninc.com/catalog/advanced_search_result.php?keywords=fuel&x=6&y=5 Well Russ you got another link the one you posted is no good (go figure been a while). Thinking of using setup to pull fuel (diesel) to the burner tank from trucks fuel tank. Thanks Share this post Link to post Share on other sites
Douglas Hicks 128 Report post Posted May 3, 2011 At one time I knew a fleet washer in Boise who used a 12V fuel pump to fill his PW fuel tank. He used a push button switch to operate the fuel pump. Share this post Link to post Share on other sites
Rick2 42 Report post Posted May 4, 2011 I was wondering if I could plumb the fuel line from my pressure washer into the fuel tank of the van it is mounted in. Will the 18hp briggs be able to pull the fuel up from the tank?thanks Why? Don't you get a few hours run-time with the stock fuel tank? Share this post Link to post Share on other sites
