steven 37 Report post Posted September 5, 2015 Just a couple of pics of a project I am working on, this was some really old shakes that needed two fat coats of amber. you can see on the front where i left off on the second coat. 4 Beth n Rod, Jake Clark, RPetry and 1 other reacted to this Share this post Link to post Share on other sites
0 steven 37 Report post Posted September 14, 2015 Rick, That tree was huge. To bad it wasn't hardwood they are getting $300 a cord. I have been in this area for about twelve years. Population 3500. My market up here is a tough one. I have to travel 20 to 40 miles for about 50% of my work. I love it though, I probably do 1/8th of what most southern power washers do yearly ( mostly cuz I want it that way and I charge way to much) and I am happy. That farm with the beef cattle is owned by my wife's uncle. She, the misses, grew up there. milking cows when she was young. Talk about working your property. Uncle David is out there every day doing something with his property. it is a true never ending chore. We have just under two acres here but they have 375 acres across the street. Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted September 15, 2015 The question is, what did you do with the lumber? Beth Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted September 15, 2015 Beth, My nephew and I cut off all the branches, sectioned the trunk, and hauled it to our road in front by dragging with my pickup and chain. Rented a backhoe, dug out the stump and sectioned it, and deposited it in the strip of woods bordering the sides of our property. A local small nursery chipped it all up and took it away. The next spring we purchased 15 yds. of mulch from them. Bet part of the load was that tree. Got us coming and going! 1 Beth n Rod reacted to this Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted September 16, 2015 No fire place? No fire wood? You could have seasoned that and sold it roadside to pay for your Heineys!!! Beth Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted September 16, 2015 Beth, Spruce and most pine wood is not worth the effort to split, particularly when it has not cured for many years. Too much resin, coats the flue, smoky, poor burning etc. We do have a large, well built LR fireplace and a fire pit outside in the back. The original owner and builder who we purchased the property from was a mason! We only use hardwoods in the fireplace and for $110 per face cord split and delivered, well worth it. Share this post Link to post Share on other sites
0 mike movila 78 Report post Posted September 17, 2015 Steven I use Graco and looking at purchasing a Titan airless and back brushing seems to work pretty quickly and efficiently Share this post Link to post Share on other sites
0 steven 37 Report post Posted November 9, 2015 I swung over to the house today to get some after pictures and here is the end result Share this post Link to post Share on other sites
0 Beth n Rod 1,279 Report post Posted November 10, 2015 It's a gratifying feeling to be able to go back and check on how a project is holding up and see what you just posted. We could see you put a lot of hard work into it and the results are looking excellent. Rod Share this post Link to post Share on other sites
0 RPetry 564 Report post Posted November 10, 2015 Stephen, Terrific before/after pictures. Like the house, especially the wrap around porch and the site. The view from the back of the home must be stunning. Share this post Link to post Share on other sites
0 steven 37 Report post Posted November 10, 2015 Thanks guys, Of all the picture I took I didn't take one of the view. here is the best shot I got you might be able to see some of it,The view is phenomenal,. Mount Washington is dead ahead. so of course the deck had to be spot on. Share this post Link to post Share on other sites
Just a couple of pics of a project I am working on, this was some really old shakes that needed two fat coats of amber. you can see on the front where i left off on the second coat.
Share this post
Link to post
Share on other sites