Jimmy M 14 Report post Posted October 10, 2005 Has anyone tried the new heavy duty telescoping wand from Sunbrite. Wondering if it is any better than the ones from northern tool when extended all the way out. Share this post Link to post Share on other sites
0 mikew 14 Report post Posted October 10, 2005 Has anyone tried the new heavy duty telescoping wand from Sunbrite. Wondering if it is any better than the ones from northern tool when extended all the way out. Not sure which one you are talking about but... I bought this wand from SunBrite not long ago (maybe 1 or 2 months) and it seems to do fine. http://store.yahoo.com/sunbrite/nealctewafrb.html I have only done some testing of the wand on my own house. Haven't had a need to use it yet. Wand seems to work fine. It comes with a belt kit which is good because it feels pretty heavy to me when extended all the way out. I have not used any other tele wands to compare too so I can't help with comparisons to others. Thanks, Mike Share this post Link to post Share on other sites
0 mikew 14 Report post Posted October 10, 2005 Jimmy, Also this wand is heavy duty. I feel pretty confident that it will hold up to a lot of use in the field. I couldn't justify the cost of a coress or Steve Rowlett's heavy duty wand so I got this one instead. Just my personal opinion. Thanks, Mike Share this post Link to post Share on other sites
0 Don Phelps 85 Report post Posted October 10, 2005 I have a Coress and it has it's place, but no more than it's used, it's still very difficult to justify the expense. Share this post Link to post Share on other sites
0 PressurePros 249 Report post Posted October 10, 2005 I took my extension wand off the truck once this year and cursed every minute of it. Share this post Link to post Share on other sites
0 squirtgun 122 Report post Posted October 10, 2005 We have used our twice.It's nice to have when needed,but those occassions are rare. The B.E Supply wand or the one Northern tools sells will fit most applications. http://www.northerntool.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=6970&langId=-1&productId=200314015&R=200314015&issearch=227024 Share this post Link to post Share on other sites
0 Jimmy M 14 Report post Posted October 10, 2005 I need the wand for new construction brick cleaning. I just don't want one that will flex like a noodle.I know coress sales a nice one as does Steve Rowlett. I was hoping to spend a little less. Share this post Link to post Share on other sites
0 K.J. Pressure Washing 14 Report post Posted October 10, 2005 I bought the one from Northern tool that Squirtgun posted the link to. I bought it for a job and have yet to get myself to use it. It's noticable heavier than the yellow noodle type but looks to be very well built and capable of downstreaming.The job I'm doing is a paint prep at the Tradewinds Resort on St. Pete beach. Luckily the painter I'm doing this for rented a lift for a month and this is pretty much all i've used. I've used the noodle where I had to around 10 feet or so and in my opinion is the most practicle. Like any tool , the noodle or any extention wand has it's place. Share this post Link to post Share on other sites
0 Celeste 341 Report post Posted October 10, 2005 We have two Coress wands and wouldn't be caught without at least one on the truck. The cost was a choker up front but the particular job we needed it on paid for it and frankly we couldn't have done that one without it. Steve's is less than $500 and is built to last - between the savings on chiropractor visits and how long it's gonna be with you, it's not a bad investment. Share this post Link to post Share on other sites
0 Mike Williamson 198 Report post Posted October 10, 2005 I have a Coress and it has it's place, but no more than it's used, it's still very difficult to justify the expense. Now you can understand how I feel about hot water! Share this post Link to post Share on other sites
0 Don Phelps 85 Report post Posted October 10, 2005 After having hot water, I don't think I could ever go back to cold very often. I think I probably do more commercial than you do and it's an absolute must for gum. Share this post Link to post Share on other sites
0 K.J. Pressure Washing 14 Report post Posted October 10, 2005 Here's a few pix from the job I'm on.... Share this post Link to post Share on other sites
0 Don Phelps 85 Report post Posted October 10, 2005 So.......You can obviously afford to take me, Pete, Wayne, Mel and Mike out for a day of deep sea fishing. What day looks good for you? :lgmoneyey Share this post Link to post Share on other sites
0 K.J. Pressure Washing 14 Report post Posted October 10, 2005 Hah! I gotta pay for the new house I'm having built.:lgbugeyes Not too many days off lately either! Maybe do some paintball in the woods behind my next house. Share this post Link to post Share on other sites
0 CCPC 26 Report post Posted October 10, 2005 interesting that this would come up, I just got back from looking over a house I will be bidding on, and this sucker is HUGE!! I'm not a big fan of the idea of using an extension wand, but with this one, it just can't see any way around. The walls/eaves are up at about 25ft. in a few areas, which would be no problem with the m-5, but there's so many dirt dobbers, I'm not going to be able get good results without some close range cleaning. Is the Corress fairly rigid, extended at 20', with a tip suppling about 250 to 500 psi.? I think a lift is not going to work, as the access is limited around the house. Any other pros and cons on the coress wand would be very much appreciated. Share this post Link to post Share on other sites
0 Mike Williamson 198 Report post Posted October 10, 2005 After having hot water, I don't think I could ever go back to cold very often. I think I probably do more commercial than you do and it's an absolute must for gum. If you do more than one regular commercial job, you do more than me! I have a grand total of ONE commercial job, every two weeks, and the chlorine does all I need for that one...little to no gum (1-2 pieces, max, if any). Share this post Link to post Share on other sites
0 Mike Williamson 198 Report post Posted October 10, 2005 interesting that this would come up, I just got back from looking over a house I will be bidding on, and this sucker is HUGE!! I'm not a big fan of the idea of using an extension wand, but with this one, it just can't see any way around. The walls/eaves are up at about 25ft. in a few areas, which would be no problem with the m-5, but there's so many dirt dobbers, I'm not going to be able get good results without some close range cleaning. Is the Corress fairly rigid, extended at 20', with a tip suppling about 250 to 500 psi.? I think a lift is not going to work, as the access is limited around the house. Any other pros and cons on the coress wand would be very much appreciated. Yeah, the Coress is plenty rigid, and fairly light, just expensive! The coress used to be the absolute best out there, but I hear there's a new wand out there now that's even better...the RX somethingorother. :rolleyes: Share this post Link to post Share on other sites
0 Celeste 341 Report post Posted October 10, 2005 On large new construction brick, you're wielding that things for lengthy periods of time so maneuverability and less flex is really important. The Coress is light enough at I (5'4", 135 lbs) can handle it for a respectable time frame. I watched Roger (5'10", 230 lbs) with the noodle kind and he looked like a cat wrestling a grizzly bear. The rigidity is remarkable. Steve's Magnum wand is lighter weight, slightly smaller diameter, has a removable gun, has different type screw tighter thingies, and if this is important to you - Made In America. Celeste Share this post Link to post Share on other sites
0 tropical wave 22 Report post Posted October 11, 2005 Ive got the blue fiberglass jobber from one of the internet sites, it noodles with a high psi tip, but a larger hole its pretty rigid, pretty heavy and it rarely gets used.....the absolute worst thing is the twist locks on the poles, after just a little flex, they are a bear to twist loose, especially with wet hands......whatever you get, find a pin lock type..... Share this post Link to post Share on other sites
0 CCPC 26 Report post Posted October 11, 2005 Anybody know hat kind of lock mechanisms the coress wands and Steve's wands have? Share this post Link to post Share on other sites
0 Don Phelps 85 Report post Posted October 11, 2005 Anybody know hat kind of lock mechanisms the coress wands and Steve's wands have? The last time I checked my Coress had the twist-locks, but they don't stick like the cheapy noodles do. Share this post Link to post Share on other sites
0 Mike Williamson 198 Report post Posted October 11, 2005 Anybody know hat kind of lock mechanisms the coress wands and Steve's wands have? I believe they both have the twist kind, but being aluminum, you don't get the problems with them overtightening. I've not had a problem with mine the few times I've used it. Share this post Link to post Share on other sites
0 mikew 14 Report post Posted October 11, 2005 Anybody know hat kind of lock mechanisms the coress wands and Steve's wands have? Steve's wand has the twist locks. The BE aluminum wand that I have has the pin locks. Thanks, Mike Share this post Link to post Share on other sites
0 CCPC 26 Report post Posted December 9, 2005 Can someone give me the web address for corress? Just wasted 30 minutes of my life searching for it on here and on Google with no luck. Share this post Link to post Share on other sites
0 Washaway 64 Report post Posted December 9, 2005 I attribute my bad habit for cursing to the extendable wand. I've used the wand 3 times since I bought it 3 years ago and haven't been able to rid the nasty cuss words since. :lgangry: Share this post Link to post Share on other sites
0 Neil_Asheville 114 Report post Posted December 9, 2005 http://www.coress.com Share this post Link to post Share on other sites
Has anyone tried the new heavy duty telescoping wand from Sunbrite. Wondering if it is any better than the ones from northern tool when extended all the way out.
Share this post
Link to post
Share on other sites