Chappy 138 Report post Posted February 2, 2004 What is the purpose of the lance. What makes it different from the wands. are there circumstances that it is necessary? Just curious? Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted February 2, 2004 Are you referring to a dual lance? If you are then it serves a couple of purposes. You can use it to lower pressure, without changing the tips or messing with the unloader, and you can use it for downstreaming chemicals. Turn the handle and you get low pressure, which will make the chems draw, and twist back for high pressure and no chems for a rinse. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted February 2, 2004 Or do you mean a lance like an extension? Share this post Link to post Share on other sites
Scott Stone 604 Report post Posted February 2, 2004 Or do you mean a Lance like a Winslow. Not very effective, and really noisy. Share this post Link to post Share on other sites
Chappy 138 Report post Posted February 2, 2004 Ive seen the dual lances and extension wands. The single lances is really what Im asking about. Jon C Share this post Link to post Share on other sites
Russ Johnson 141 Report post Posted February 2, 2004 That's funny, Scott. Share this post Link to post Share on other sites
Scott Stone 604 Report post Posted February 2, 2004 A Lance and a wand are interchangeable terms. Sometimes a dual lance is called a dual lance wand. Scott Stone Share this post Link to post Share on other sites
paul-uk 500 Report post Posted February 2, 2004 ????? i am still not sure what you are after , jon...i was going to chip in with lancelot but.....;) Share this post Link to post Share on other sites
Chappy 138 Report post Posted February 3, 2004 I was just curious. Ive seen the lances in catalogs, and because they look so different from the wand I have, I just thought they were something special and I was missing some important tool. Chalk it up to being a newbie. thats why I come to this board. Thanks everyone. Jon C Share this post Link to post Share on other sites
paul-uk 500 Report post Posted February 4, 2004 no probs jon....i think most call it a extension lance and anything else a wand.......makes no odds jon your welcome to post whatever you to know about on here....sometimes you can ask a question that has been answered a few times before but this can be a good thing as things change all the time and someone might of come across a piece of kit or a way of doing something a different way and will post it for all to benifit from.....so feel free to fire away. cheers paul. Share this post Link to post Share on other sites
