Beth n Rod 1,279 Report post Posted March 30, 2003 The following outlines common cleaning agents, their hazards, and safety precautions: CLEANING AGENT POSSIBLE HAZARDS SAFETY MEASURES Ammonia - can cause severe eye and lung irritation. - if mixed with bleach, can form poisonous chlorine gas. - use in a well ventilated area. - do not mix with bleach. - wear eye protection. Bleach - can produce a poisonous gas if mixed with other cleaners - never mix with toilet cleaners or ammonia - wear gloves & eye protection. Toilet/Drain Cleaners & Lye (Lye: also known as Sodium Hydroxide or Potassium Hydroxide) - can cause serious burns. - wear gloves and avoid skin contact. - never mix with bleach. - protect eyes from possible splashes. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted May 31, 2003 Looking at the MSDS for Ultra Clorox, it lists Sodium Hydroxide as an ingredient. Where did this info come from, I would like a confirmation. Toilet/Drain Cleaners & Lye (Lye: also known as Sodium Hydroxide or Potassium Hydroxide) - can cause serious burns. - wear gloves and avoid skin contact. - never mix with bleach. - protect eyes from possible splashes. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted June 1, 2003 http://www.cwip.com/msds_frames.htm Here's an MSDS for Ultra Clorox. I got the other info from a chemist's site. :) Beth Share this post Link to post Share on other sites
Ron Musgraves 240 Report post Posted March 27, 2004 its correct, that caustic,,,unpredictable......... Share this post Link to post Share on other sites
Aplus 525 Report post Posted March 27, 2004 Never let brake fluid and chlorine mix. Not that you would normally mix the two, but it is possible that both could be stored on then same shelf. If the two mix, a fire will start. Naturally I had to see if that was true, so as a test, I poured some of each into a styrofoam coffee cup, and it went up in a blaze in about 2 minutes. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted March 27, 2004 Don't give anyone any stupid ideas. Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted March 27, 2004 The owners of this site do not suggest nor do we recommend mixing chemicals together which are known to combust. We advise against it. ;) Share this post Link to post Share on other sites
stoppie101 20 Report post Posted April 12, 2004 for best results- do you recomend dot 3 or 4 brake fluid? :sinister: Share this post Link to post Share on other sites
PLD 14 Report post Posted May 4, 2004 I assume you mean granulated pool chlorine? Liquid Cl in just about any concentration should provide enough cooling/buffering to prevent flames. Anyway, I used to do this as a kid for kicks. Put some pool shock in a tin can and add a spoonful of brakefluid. Set it somewhere in the yard at a safe distance, but in plain view of some unsuspecting victim. A few minutes later, dad (quietly mowing the lawn) nearly falls off the lawnmower when he sees a 3ft flame erupting from the bird bath. Anyway, pre-teen pranks aside. It's extremely combustible, auto igniting, and will become explosive if contained. The time to erupt varies wildly with temperature and in the presence of contaminants. For that matter, compounds of oxidizers (like hypochlorite compounds) and any type of fuel (oil, brake fluid, etc) make a hazardous enerjetic mixture. Most solid rocket fuels are nothing more than an oxidizer suspended in a rubber fuel. Brake fluid is particularly nasty because it contains sulfur compounds which destabilize the mixture and allow decomposition to begin. This decomposition liberates heat, which causes further decomposition. The ends result is a big hot fire that errupts with no warning. The moral: Be very aware of oxidizers and their proximity to any type of fuel. Very partial list -------------------------- Oxidizers: sodium/calcium hypochlorite Acids - oxalic, hydrochloric, HF. Some ammonia compounds Almost all nitrate compounds. Fuels: Wood, paper, oil, plastic, rags, etc. i.e. Just about anything. In the presence of a strong oxidizer, even metal will burn as readily as gasoline... Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted June 18, 2004 Alan, you mean Clorox 'outdoor' Bleach? It has sodium hydroxide in it along with buffers and oxidizers to stabilize the matrix. Share this post Link to post Share on other sites
One Tough Pressure 580 Report post Posted June 18, 2004 I have not seen the msds for Outdoor bleach. I will have to pull the msds that I have, but I think it is for the commercial germicidal ultra clorox. Off for a week so it will not be soon. Share this post Link to post Share on other sites
staudend 14 Report post Posted October 2, 2004 Being a 10 year old in a 22 year old's body, I tried putting some granulated pool chlorine with some dot 3 brake fluid. Nothing... I tried some 6 percent bleach and got some wicked bubbling and some heat. Maybe I need to get some better chlorine or something. What's the recipe doolittle? Nick Share this post Link to post Share on other sites
PLD 14 Report post Posted April 17, 2007 Too much brake fluid is a bad thing. Try 2tbsp chlorine & 1/2 tsp brake fluid. Stay clear, it burns like a road flare and puts off toxic fumes. Share this post Link to post Share on other sites
seymore 90 Report post Posted April 17, 2007 I learned not to pour the wrong bag of oxalic acid in the bucket of Sodium Hydroxide! :2eyes: Share this post Link to post Share on other sites
4000psi 16 Report post Posted April 23, 2008 Never let brake fluid and chlorine mix. Not that you would normally mix the two, but it is possible that both could be stored on then same shelf. If the two mix, a fire will start.Naturally I had to see if that was true, so as a test, I poured some of each into a styrofoam coffee cup, and it went up in a blaze in about 2 minutes. Very helpful! Don't want to mix the wrong chemicles...Thanks Aplus:winkanim: Share this post Link to post Share on other sites
scpressure 14 Report post Posted June 21, 2008 Early one morning I was pumping shc into empty(so i thought) 5gal buckets. About 3 seconds into the second bucket I heard air being forced from the top of the bucket followed by a stream of foam spuing everywhere, ceiling, my arms and face. This was cause by dried oxilic in the bottom of the bucket being rehydrated with shc, not a good combo. Share this post Link to post Share on other sites
Apple Roof Cleaning 202 Report post Posted July 21, 2008 Looking at the MSDS for Ultra Clorox, it lists Sodium Hydroxide as an ingredient. Where did this info come from, I would like a confirmation.Toilet/Drain Cleaners & Lye (Lye: also known as Sodium Hydroxide or Potassium Hydroxide) - can cause serious burns. - wear gloves and avoid skin contact. - never mix with bleach. - protect eyes from possible splashes. ALL sodium hypochlorite contains hydroxide It is a byproduct of the manufacturing process. BUT, in the case of Clorox outdoors, MORE of it is added for improved cleaning, and storage stability. Share this post Link to post Share on other sites
Greg R 82 Report post Posted July 22, 2008 Early one morning I was pumping shc into empty(so i thought) 5gal buckets. About 3 seconds into the second bucket I heard air being forced from the top of the bucket followed by a stream of foam spuing everywhere, ceiling, my arms and face.This was cause by dried oxilic in the bottom of the bucket being rehydrated with shc, not a good combo. Thats bad news there.... it creates chlorine gas which when mixed with H20 creates muriatic acid. This stuff can kill ya dead if you inhale too much so be carefull out there. The chlorine gas when inhaled mixes with H20 in your body. One of my guys did that same thing in our shop and just a few minutes we had to evacuate the shop for about 45 minutes. You couldn't stand to even walk in there! Share this post Link to post Share on other sites
Beth n Rod 1,279 Report post Posted August 23, 2008 (edited) I think the confusion here was assuming that the toilet and drain cleaners were containing lye, most actually are acids which when mixed with either bleach or ammonia products will produce a harmful gas. (see msds links below) Bleach and sodium hydroxide mixtures are not a problem. I don't necessarily agree with chris's post about sodium hydroxide being a by-product of the manufacturing process but it is used to stabilize the pH of the bleach. In the outdoor formula, there is no more Sodium hydroxide than the regular bleach but there are other surfactants added to enable the sodium hydroxide it does contain to be active otherwise it is classified as an 'inert ingredient'. http://www.thecloroxcompany.com/products/msds/bleach/cloroxregularbleach0505_.pdf http://www.thecloroxcompany.com/products/msds/bleach/cloroxoutdoorbleachcleaner6-07.pdf Compare for yourselves. http://www.hescoinc.com/Msds/ly74278.pdf http://www.hescoinc.com/Msds/ly94201.pdf Mixing bleach and sodium hydroxide together is a powerful oxidizing agent not to mention corrosive as well. The following link is for pdf based msds on drain cleaners for example. http://www.scjohnson.com/msds_us_ca/drano.asp Hope this helps to answer some questions. Rod!~ Edited August 23, 2008 by Beth n Rod Share this post Link to post Share on other sites
Rick2 42 Report post Posted November 15, 2009 Go to youtube and search for brake fluid and chlorine mix. Lots of idiots out there. Share this post Link to post Share on other sites